Alert Settings (Alert) - JRC JLR-21 Instruction Manual

5.3.9 Alert Settings (ALERT)

Selecting ALERT
Procedure
1. Press the
2. Press the
The following items are displayed.
• ALARM ESCALATION:
• HEADER ALERT DISP:
• DGPS ALERT:
• TEST MODE:
Memo
• If the position correction mode is "GPS ALONE" (Refer to 5.3.4), DGPS alert is disable.
• After muting the warning alert, if it is not acknowledged for 15 seconds, the warning will
occur again (warning escalation).
• Starting-up the display uint (turning the power on), the setting value of "HEADER ALERT
DISP" and "TEST MODE" will set to "OFF".
from the "5.3 Main Menu" displays the Alert Settings Screen.
Alert Settings Menu
keys to move the cursor and select an item.
key to display the menu for the selected item.
Select whether the "No positioning" or "No Heading" warning
will escalate to an alarm.
POSITION ON:
OFF:
HEADING ON:
OFF:
TIME:
Select whether to display the aggregation or grouping in the alert
display.
ON:
OFF:
Select whether to occur the alert for non-DGPS.
ON:
OFF:
Select whether to return the ALF of all alerts for "Q" of ACN for wildcard.
ON:
OFF:
Enable the escalation.
Disable the escalation.
Enable the escalation.
Disable the escalation.
Set the time until escalation.
Display in aggregation or grouping.
Not display aggregation or grouping.
Enable.
Disable.
Returns ALF of all alerts (include normal condition).
Returns ALF other than normal condition.
5-35