JRC JLR-21 Instruction Manual page 46

[Data IN/OUT 1 Connector]
Terminal
Number
(CFQ-5374)
1 (Brown)
Unused
2 (Red)
3 (Orange)
Sensor
4 (Yellow)
Through
5 (Green)
6 (Blue)
7 (Purple)
DATA OUT3
(TXD3)
8 (Grey)
9 (White)
Unused
10 (Black)
11 (Pink)
12 (Light Blue)
*1: 4 pins are used for AD-10. Refer to "Output of AD-10 Format" in "5.3.7 Data I/O Settings
(DATA I/O)" for details.
Appearance of Connection Cable
（CFQ5374-15）
Approx.Φ18mm
Connector
Product by LTW : LTWCD-12BFFA-LI80
2-28
DATA IN/OUT 1 (Label name of the back of Display)
① ⑧
② ⑨ ⑦
⑪ ⑫
③ ⑩ ⑥
④ ⑤
Name
SD-A
SD-B
SC-A
SC-B
A
B
GND
ISO
GND
CFQ-5374
CFQ-5374
（CFQ5374-15 15m）
A
B
Data Cable: CFQ-5374 (option)
Explanation
Output signal is sent from this terminal by
connecting the sensor.
Outputs as defined by "Sensor Through"
configuration.
(Refer to "5.3.7 Data I/O Settings (DATA I/O)")
Outputs clock when AD-10 configuration is
performed for "Sensor Through".
This port is not used excluding AD-10. (*1)
Outputs as defined by "Data OUT 3"
configuration.
(Refer to "5.3.7 Data I/O Settings (DATA I/O)")
Connects serial transmission cable ground.
Chassis ground
Approx.Φ6.5mm
3m
Shield for cable
External Device