Applying The Cuff - HoMedics BPW-360BTPU Manual

Note:
• For use with iPod touch
(3rd generation), and iPad mini™. For a complete list
of compatible mobile devices, please scan QR code
below or visit http://qr.homedics.com/compatibility.
• The App must be open on your mobile device in order
to establish a connection with the monitor.
• Bluetooth ® must be turned ON on your mobile device.
• The App will only receive new readings from the
monitor. The App will not store or display duplicate
measurements.
® , iPhone ® 5, iPhone ® 4S, iPad
15

APPLYING THE CUFF

®
1. Remove all watches, wrist jewelry, etc.
prior to attaching the wrist monitor.
Clothing sleeves should be rolled up
and the cuff should be wrapped around
bare skin for correct measurements.
2. Apply cuff to left wrist with palm facing
up as shown in Fig. A.
3. Make sure the edge of the cuff is about
1/4"~1/2" (1 cm) from the palm as
shown in Fig. B.
4. In order to ensure accurate
measurements, fasten the hook and
loop strap securely around your wrist so
there is no extra space between the cuff
and the wrist. If the cuff is not wrapped
tight enough, the measurement values
will not be accurate.
5. If your physician has diagnosed you
with poor circulation in your left arm,
place the cuff around your right wrist as
shown in Fig. C.
Note:
If it is not possible to use the cuff on your
left wrist, it can also be used on your right
wrist. However, all measurements should
be made using the same wrist.
Fig. A
Fig. B
Fig. C
16