Display Explanations - HoMedics BPW-060-DDM Manual

DISPLAY EXPLANATIONS

Date/Time Indicator
Systolic
Pressure
Diastolic
Pressure
Pulse Rate
11
Display Symbols:
User 1: Appears when the monitor is operated
by User 1.
User 2: Appears when the monitor is
operated by User 2.
Weak Battery Symbol: Appears when batteries
should be replaced.
Pulse Symbol: Shows the pulse rate per minute.
Memory Average: Displays average of last
3 readings
Risk Category Indicator: Compares readings
against blood pressure guidelines. See page 22
for more information.
(No Symbol)
If and any of the following letters and numbers
M START
STOP
appear in the area that systolic pressure should be
displayed, an error has occurred with your reading.
See Troubleshooting section of this manual for more
information.
Measurement Error: Measure again. Wrap
the cuff correctly and keep wrist steady
during measurement.
Air Circuit Abnormality: Measure again.
Pressure Exceeding 300 mmHg: Switch the unit
off to clear, then measure again.
Error Determining Measurement Data: Measure
again.
12