Table of Contents
Advertisement
To turn this feature on, select "Caller ID". To turn this feature off, select "Manual".
(Caller ID subscribers only)
To use this feature, set the date and time first (page 12).
*3
KX-TGC212
*4
The ringer tone may continue to play for several seconds even if the caller has already hung
up. You may either hear a dial tone or no one on the line when you answer the call.
*5
The preset melodies in this product ("Ringtone 3" - "Ringtone 15") are used with
permission of © 2012 Copyrights Vision Inc.
*6
If you do not want the unit to ring before the caller information is received, set to "Off".
(Caller ID subscribers only)
You can only remove the first ring if the unit rings 2 times or more by default, which depends
on your service provider/telephone company.
*7
Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any
keys, including confirmation tones and error tones.
*8
If you subscribe to a Caller ID service and want to view the caller's information after lifting up
the handset to answer a call, turn off this feature.
*9
The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*10 To prevent other users from joining your conversations with outside callers, turn this feature
on.
*11 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
Alarm
An alarm sounds at the set time for 1 minute
and is repeated 5 times at 5 minute intervals
(snooze function). A text memo can also be
displayed for the alarm. A total of 3 separate
alarm times can be programmed for each
handset. You can set one of 3 different alarm
options (once, daily, or weekly) for each alarm
time.
Important:
R Make sure the unit's date and time setting
is correct (page 12).
1
M
N#720
2
Select an alarm by pressing 1 to 3. a
MOKN
3
MbN: Select the desired alarm option. a
MOKN
"Off"
Turns alarm off. Go to step 9.
"Once"
An alarm sounds once at the set time.
TGC2xxCX_(en)_0530_ver002.pdf
4
5
6
7
8
21
Programming
"Daily"
An alarm sounds daily at the set time.
Go to step 5.
"Weekly"
Alarm sounds weekly at the set time(s).
Proceed with the operation according to
your selection in step 3.
n Once:
Enter the desired date and month. a
MOKN
n Weekly:
MbN: Select the desired day of the week
and press M N. a MOKN
Set the desired time. a MOKN
Enter a text memo (10 characters max.).
a MOKN
MbN: Select the desired alarm tone. a
MOKN
R We recommend selecting a different
ringer tone from the one used for
outside calls.
MbN: Select the desired snooze setting.
a MOKN
21
2014/05/30
15:36:24
Advertisement
Table of Contents
