Table of Contents
Advertisement
3. Software Operation
3.3.5
Output signal equalizer and crossover operation
Reset Output Configuration button:
This button is to re-configure the output signal of the channel type of operation,
when clicked, will pop up prompt for users to choose. "Empty" is to get all the
output signal is not connected to any output channel speaker, of course, there will
be no signal output, in preparation for the user flexible configuration. "Default" is to
restore the initial system configuration, system configuration 4.1 sound field initial
full frequency mode. "Cancel" is to cancel the click operation.
Freeze output Configure button:
Click this button to configure the channels CH1 to CH12 to lock or unlock
operation, it indicates that the configuration channel is locked, click this button
again to unlock the display when the button is green. In the unlocked state, click
CH1~CH12 can be configured to output the positioning of the sound field; in the
locked state, if the output channel sound field is empty, you can not click to enter
the editing interface, only the output channel sound field is not empty, click on the
channel to enter edit mode, but the channel is not possible to select the sound field.
Output about FBI button:
Click this button, a pop-up dialog box, select the synchronous mode (option to
"copy from left to right" or "Copy from right to left" radio button), press "OK" to
confirm; when you click this button again FBI releasing left and right channels
function. (Note: the left or right channel by the FBI, the software will automatically
lock output channels, output of the equalizer, divider and output volume data may
FBI mute, phase, space and delay are not the FBI. .) in the locked FBI, the item
associated tone has an FBI logo be displayed.
Load Output Configuration button:
Click this button has been stored in the computer signal output channel sound field
configuration file is loaded into the machine. After loading the output profile output
channel lock automatically released and left and right channels FBI. When this
function button for
DA-12DSP Special DSP amplifier
17
figure 3.3.10
User Manual
Advertisement
Table of Contents
