Table of Contents
Advertisement
3. Software Operation
3.3 Software interface
Software interface DA-12DSP unit divided into the following functional:
1．as shown in figure 3.2.2, "1", input signal selection: high level, Bluetooth, S/PDIF,
AUX and Player.
2．as shown in figure 3.2.2 "2", shows the main menu and connection status.
3．as shown in figure 3.2.2 "3", the high-pass and low-pass Settings of the divider.
4．as shown in figure 3.2.2, "4", area is output channel EQ setting.
5．as shown in figure 3.2.2, "5", shows the setting of delay space.
6．as shown in figure 3.2.2,"6", output channel configuration and common
parameter adjustment area.
7．as shown in figure 3.2.2, "7", shows the setting of Mixer space.
3.3.1 Input signal select
In the online mode, in Figure 3.2.2 "1", click the appropriate input source, you can
switch the audio input signal.
Optional: High level, AUX and player. The default audio source can be selected in
the option of "1" zone. The default power source is high level. Users can choose AUX
and player as the default power source.
The volume can be directly pushed left and right, or input volume value, scroll the
mouse wheel, etc. Adjustable range: 0-40
DA-12DSP Special DSP amplifier
11
Figure 3.2.2
User Manual
Advertisement
Table of Contents
