2. System connections
2.2 Unit connection
indication"7","9"is the plug connecting position and assort with connecting cable
which is matching unit.(figure 2.2) Connecting wire specifically defined in the
following table:
indication " 10 " , Speaker output for Connecting wire specifically defined in the
following table:
Direction:
1.only for the original Plug & Play cables, or user using others directly.
2.REM input, when the toggle switch to ACC, only ACC input; When the toggle
switch is switched to HOST, the two high level input lines of FL+/FL- are defined.
When there is original car or other high level input, the machine will detect the
audio signal to start the machine.
Note: when do not use high level input (only RCA low level input), the toggle switch dial in
DC, defined in FL+/FR+/RR+/RL+ arbitrary a all can access REM or ACC input, can be
normal to start the machine.
DA-12DSP Special DSP amplifier
8
Figure 2.2
User Manual