3. Software Operation
3.1 Software Installation
PC tuning software is no need to install drive program, plug and play.
Operating environment: Suitable for Windows XP / Vista / WIN7 / WIN8
operating system.
The installation procedure describes:
After you install the software and downloading, double-click the installation file,
step down can be achieved by tuning the software is installed.
3.2 Turn on and turn off
Double-click the DA-12DSP icon to open the software, and the main interface
before online is shown in figure 3.2.1 :(the upper right corner refers to the
unconnected state)
DA-12DSP provides only wired USB PC software connection. Wired USB
connection:
Ensure that DA-12DSP power state, with a USB cable to connect to a computer
through the USB interface, the computer will find the new device and automatically
install the update equipment, after a few seconds the installation is complete.
Mixer software will automatically line up with the hardware. Right corner refers to
"connected" state.
DA-12DSP Special DSP amplifier
10
Figure 3.2.1
User Manual