Installing The Stand - Hisense 75U90G Quick Setup Manual

Installing the Stand or Wall Mount Bracket
CAUTION
Be sure to disconnect the AC power cord before installing a stand or wall mount
brackets.
The display on your TV is fragile. Make sure the TV screen is not scratched or
damaged by hard objects or from pressure.
For the large size and weight of your TV, two people or more are required to take
out and move your TV and complete installation.
After the installation is completed, make sure the TV is steady on a table or firmly
attached to a wall mount, before removing all protective film, if any.

Installing the stand

Follow the illustrations and textual instructions below to complete the installation steps:
1. The Base Stand has been fixed on your TV. Therefore, please directly take out your
TV and place it on a desired position.
Since there are Cushion Blocks attached on the bottom of your TV, be sure to hold
your TV to avoid toppling over.
2. Tilt your TV slightly and remove the Cushion Blocks. When removing the Cushion
Blocks, mind your hands.
3. Install the Base Stand Coverplate.
Cushion Blocks
(to prevent pinching hazards)
Base Stand Coverplate
2