Installing The Stand - Hisense 65U9HAU Quick Setup Manual

Installing the Stand or Wall Mount Bracket
CAUTION
Be sure to disconnect the AC power cord before removing a base stand or installing
wall mount brackets.
The display on your TV is fragile. Make sure the TV screen is not scratched or
damaged by hard objects or from pressure.
After the installation is complete, make sure the TV is steady on a table or firmly
attached to a wall mount, before removing all protective film, if any.

Installing the Stand

Follow the illustrations and instructions below to complete the installation steps:
For 65"
1. Carefully place your TV face-down on a soft, flat surface to prevent damage to the
TV or scratching to the screen.
2. Take out the Base Stand Part A
and open it from top, then separate
it into Part a1 and Part a2.
3. Put Part a1 onto the back cover
of the TV.
4. Secure Part a1 with 4 screws (M5×12)
onto the back cover of the TV.
Part A
Part a1
2
Part a2
Part a1
Part a1
Part a1
4 Screws:
M5×12