Playing Back A Music File Through Usb Memory Stick; Preparing For Usb Memory Stick Playback; Playing Back A Music File - Sanyo FWSB415E Owner's Manual

Playing back a music file through USB memory stick

You can enjoy playback of music files which are stored on a USB memory stick on this unit.

Preparing for USB memory stick playback

You require the following equipment:
– A FAT(FAT16)/FAT32 formatted USB memory stick
– A music file which has extension of "WAV"
NOTE(S)
• WAV files stored in the root directory, or in a folder in the root directory, can be played.
• Playback is in alphabetical/numerical order (folder/file) names. Files in the same folder will be played continuously.
• Playable format is: up to 96KHz/24bit, Stereo, LPCM.
• Only FAT(FAT16)/FAT32 formatted portable memory is supported.
• When a music file is playing back, do not remove a USB memory stick.
This may cause the corruption of the music file or damage to the USB memory stick.
• If you cannot play music file after the USB memory stick is inserted, retry the procedure or please contact call center
for further assistance.
• Some music files stored on some USB memory sticks with this unit may not play back.

Playing back a music file

1
Connect your USB memory stick with a music file to the USB terminal on the rear of the
soundbar.
2
Press on the remote control to switch the soundbar to USB mode.
• When the soundbar connects the USB memory stick,
the USB and PAIR indicator will lightup while
loading.
• If the soundbar successfully completed loading the
USB memory stick and the music files, the USB
indicator will blink slowly.
3
Press on the remote control to play a music file on the connected USB memory stick.
• Press if you want to pause playback. To go back to playback, press
• You can also use
• If you press twice, the music file will go back to the previous music file. Press it repeatedly to go to the previous
music files. The music files will move backward one at a time.
4
To exit USB mode, press one of the other INPUT source buttons on the remote control.
USB indicator behavior
(The arrow indicates the passage of time.)
1
2
3
4
EN
to skip backward in a music file and
Remains lit
Blinks slowly
Blinks twice g
Light off g Repeats
Remains unlit
INPUT
LINE USB OPTICAL OPTICAL
INPUT
LINE USB
OPTICAL
again.
to skip forward in a music file.
The current status of the USB device
No USB device is connected or during playback.
Playback has been stopped.
A USB device is connected; no playable file is found or an
unrecognizable USB device. Make sure that the USB memory stick
has been formatted (FAT(FAT16)/FAT32) or supported music files
(".WAV") are stored correctly.
USB input is not selected or the soundbar is in standby.
– 17 –
AUX PAIR
AUX PAIR