Choosing Preset Sound; Night Mode - Sanyo FWSB415E Owner's Manual

Choosing preset sound

1
Press either
preset sound suitable for the audio that is playing.
2
The 2 LEDs (LINE and
Sound mode
STANDARD
SPORTS
MUSIC
MOVIE
NEWS
3
When the preset sound setting is set, LED indicators go back to the current input.
NOTE(S)
• Select any preset sound according to your preference, regardless of categories.
• The default preset sound is MOVIE.
• This setting will remain while the soundbar is in standby mode.

Night mode

Night mode 1
Turns down the volume on the subwoofer. It is useful late at night.
1
To switch the unit to night mode 1, press
Night mode 2* (dynamic range control)
Adjusts for clarity even when the volume is low, by compressing the range of the lowest sound level and the highest
sound level.
1
To switch the unit to night mode 2, press and hold
* This function is only effective for Dolby Digital sounds.
* This function is only available when the soundbar is connected via optical.
Mode
LINE
Night mode 1
LINE
Night mode 2
Input source
OPTICAL Dolby Digital
PCM
LINE
AUX
USB
BLUETOOTH
NOTE(S)
• The default setting of both night modes are off.
• These settings will remain while the soundbar is in standby mode, so again use
mode to the next mode.
EN
, , ,
PAIR) blink once.
LED lighting patterns
INPUT
LINE USB OPTICAL
LED lighting patterns
INPUT
USB OPTICAL AUX PAIR
INPUT
USB OPTICAL AUX PAIR
Night mode 1 Night mode 2
4
4
4
4
4
4
or on the remote control to select the desired
AUX PAIR
.
LED behavior
On: Flashes 4 times
Off: Flashes twice
On: Flashes 4 times
Off: Flashes twice
4
-
-
-
-
-
– 14 –
.
Sound effects
On: Lowers the volume of the subwoofer.
Off: Outputs the sound at the same volume
as the original.
On: Turns down loud sounds and turns up
soft sounds in order to keep voices at a
comfortable volume.
Off: Outputs the sound at the same volume
as the original.
to turn the mode from current