Line-In Cable; Connections; Connect To Tv; Connect Audio From Other Device - Sanyo FWSB415E Owner's Manual

Included cable used in this connection are as follows:
• Line-in cable × 1
1
Connect to a device

Connect to TV

Rear of soundbar
AUX
LINE
OPTICAL
Digital audio optical cable
(not included)
Most modern digital TVs do not have red and white coaxial analog audio outputs, but do have red and white coaxial analog audio
inputs. If you plan to use red and white analog coaxial cables to connect your TV to this soundbar, please ensure that your TV
does indeed have red and white coaxial analog audio out. Refer to your TV's user manual for details.
To connect soundbar directly to other devices (Blu-ray™ player, game system, etc.), see your device's user manual.
Use a coaxial (RCA) to optical Toslink digital audio converter (not included) for our soundbar which only has an optical input.

Connect audio from other device

Rear of soundbar
AUX
LINE
OPTICAL

Line-in cable

Digital audio optical cable
(not included)
NOTE(S)
• Make sure the soundbar is turned off when connecting cables.
• Check whether all connection cables are properly connected.
• If you connect from the headphone output on the device's source to the line-input on the soundbar, make sure the
volume from the headphone output on the device's source is set to an appropriate mid-level sound. Setting it too
low will produce weak output from the soundbar or setting it too high could cause distortion.
• If a line / optical / AUX connection fails when connected to a TV, check the audio settings on the devices.
EN

CONNECTIONS

Line-in cable
included
Audio cable
(not included)
HEADPHONE
included
Good Good
or
Best
Best
e.g.) MP3 player
DIGITAL AUDIO
OUT (OPTICAL)
– 9 –
HEADPHONE
or
AUDIO OUT
DIGITAL AUDIO
OUT (OPTICAL)
e.g.) Blu-ray™ player
e.g.) Video game
Continued on next page.
Rear of TV
R
AUDIO OUT
L