Reboot The System (Reboot) - Qsan XCubeDAS Series User Manual

2. slot <slot#>: turn on/off the disk drive LED of the specific disk drive slot
。 <slot#>: specify the drive slot number, 1 for slot 1, N for slot N
。 on: turn on the disk drive LED
。 off: turn off the disk drive LED
Example
1. Turn on the system's UID LED. Turn off the UID LED later.
CLI > ident system on
The system's UID LED is on
CLI > ident system off
The system's UID LED is off
2. Identify the drive slot 3 for maintenance use. Blinking amber LED on drive slot 3.
CLI >ident slot 3 on
Blinking amber LED on drive slot 3
CLI >ident slot 3 off
Stop blinking amber LED on drive slot 3

2.4.5. Reboot the System (reboot)

Command
reboot
Description
26 ©
Copyright 2017 QSAN Technology, Inc. All Right Reserved.
INFORMATION:
For the front and rear view about the UID LEDs, please refer to chapter 2,
System Components Overview in the
Manual.
XCubeDAS Hardware Owner's