Figure 1-2
2. You must use terminal software such as HyperTerminal or Putty to open the console
after the connection is made.
3. Here we first demonstrate HyperTerminal. The console settings are on the following.
Baud rate: 115200, 8 data bit, no parity, 1 stop bit, and no flow control
Terminal type: vt100
2
©
Copyright 2017 QSAN Technology, Inc. All Right Reserved.
Connect the Console Cable
INFORMATION:
For more information about terminal software, please refer to
HyperTerminal:
http://www.hilgraeve.com/hyperterminal/
PuTTY:
http://www.putty.org/