Safety
The equipment should be installed by a competent audio visual technician observing 'good
electrical and audio practice' at all times and following all the instructions contained within
this document.
Only use the power adapter supplied with the unit. If the power adapter or cable
is damaged, replace with a genuine Univox part.
Power adapter must be connected to a mains outlet close to the amplifier and easily
accessible.
The installer is responsible for installing the product in a way that may not cause risk
of fire. Do not cover the power adapter or loop driver. Only operate the unit in a well
ventilated, dry environment. As the product produces internal voltages greater than 35V
(peak) AC or DC, the product shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on or close to the product.
Do not remove any covers as there is a risk of electric shock. Please observe
that the product warranty doesn't include faults caused by tampering with the
product, carelessness, incorrect connection/mounting or maintenance.
Warranty
This loop driver is supplied with a 5 year (return to base) warranty for parts and labour.
Misuse of the product in any way including but not limited to, will invalidate the warranty.
•
Incorrect installation
•
Connection to non approved power adapter
•
Self oscillation resulting from feedback
•
Force majeure, e.g. lightning strike
•
Ingress of liquid
•
Mechanical impact
Maintenance and care
Under normal circumstances the product does not need any special maintenance. Should
the unit become dirty, wipe it with a clean damp cloth. Do not use solvents or strong
detergents.
24