Safety; Warranty - Edin Univox CLS-5T Installation Manual

Safety

The equipment should be installed by an audio visual technician observing 'good electrical
and audio practice' at all times and following all the instructions within this document�
Only use the power adapter supplied with the unit� If the power adapter or
cable is damaged, replace with a genuine Univox part�
Power adapter must be connected to a mains outlet close to the amplifier and
easily accessible� Connect the power to the amplifier before connecting to the
network, otherwise there is a risk of sparking�
The installer is responsible for installing the product in a way that may not cause risk of
fire, electrical malfunctions or danger for the user� Do not cover the power adapter or loop
driver� Only operate the unit in a well ventilated, dry environment�
Do not remove any covers as there is a risk of electric shock� There are no user
serviceable parts inside� Refer servicing to qualified personnel� Please observe
that the product warranty does not include faults caused by tampering with the
product, carelessness, incorrect connection/mounting or maintenance�
Bo Edin AB shall not be held responsible or liable for interference to radio or TV equipment,
and/or to any direct, incidental or consequential damages or losses to any person or
entity, if the equipment has been installed by unqualified personnel and/or if installation
instructions stated in the product Installation Guide have not been strictly followed�

Warranty

This loop driver is supplied with a 5-year (return to base) warranty�
Misuse of the product in any way including but not limited to:
• Incorrect installation
• Connection to non-approved power adapter
• Self oscillation resulting from feedback
• Force majeure e�g� lightning strike
• Ingress of liquid
• Mechanical impact
will invalidate the warranty�
9