Operating Your Wine Cooler - Vinotemp element EL-155SDWS Owner's Manual

OPERATING YOUR WINE COOLER

The controls of your wine cooler
POWER OFF/ON
To turn the appliance ON or OFF, touch the
SET
To set or view the internal temperature setting for each zone.
LIGHT
To control the interior light, turn on/off.
UP
Press to raise (warm) the set temperature by 1°C or 1°F.
DOWN
Press to lower (cool) the set temperature by 1°C or 1°F.
°F/°C Selector
Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature from
Fahrenheit to Celsius or from Celsius to Fahrenheit, touch and hold
TEMPERATURE ZONES
The wine cooler has two temperature zones with a temperature range of 40-72°F. The recommended temperature
setting for each zone is:
•
Lower Zone between 55-72°F (Ideal for red and white wines)
•
Upper Zone between 40-55°F (Ideal for sparkling and white wines)
NOTE: The temperature set for the Lower Zone must always be the same or higher than the temperature set for the
Upper Zone. For optimal performance, the set temperature of the two zones should differ by at least 4°F. It is also normal
for the temperature of the air inside the unit fluctuate by plus/minus 7°F. If it fluctuates any more than 7°F, please contact
customer service.
SETTING A TEMPERATURE
•
Touch SET to set the internal temperature for each zone. The degrees indicators will appear in the
display window marked
• When you touch SET
(preset factory setting for UPPER ZONE is
and marks at the same time for 5 seconds.
for UPPER ZONE and
for the first time, the LED readouts will show the original temperature settings
50°F / 10°C and for LOWER ZONE is 60°F / 16°C).
mark for 5 seconds.
for LOWER ZONE.
10
0