Advertisement
Quick Links
Note:
THE SIGNAL BOOSTER UNIT IS DESIGNED FOR USE IN AN INDOOR, TEMPERATURE-CONTROLLED
ENVIRONMENT (LESS THAN 150 DEGREES FAHRENHEIT). IT IS NOT INTENDED FOR USE IN ATTICS
OR SIMILAR LOCATIONS SUBJECT TO TEMPERATURES IN EXCESS OF 150°F.
Product Registration
Thank you for purchasing this weBoost product. Please take time to
register your new product at our website:
https://cellphonesignalbooster.us
Registering is quick and easy, it only takes 2-3 minutes to complete.
Your information is secure, we don't share or sell your information
to other third parties.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
RF Safety: Any antenna used with this device must be located at least 8 inches from all persons .
FCC: PWO460006 IC: 4726A-460006
How It Works
Your cell phone is an essential part of your life. weBoost is here to
ensure you have seamless connections on all your cellular devices.
The Drive 3G-S cellular signal booster is a effective solution to all
those times you have lost a call while driving your vehicle due to a
weak cell signal. Installation is simple and can be completed with
minimal tools.
Outside Antenna
NEED ASSISTANCE? WE CAN HELP!
Contact our U.S.-BASED CUSTOMER SUPPORT:
n
Contact our U.S.- based customer support team at
1-800-501-3153 or email at sales@cellphonesignalbooster.us
n
Go online for how to resolve the most common issues at
https://cellphonesignalbooster.us
n
Find a weBoost Installer on our web site at
https://cellphonesignalbooster.us
Installation is simple, but we're here to make it even easier.
111507_Rev02_01.30.15
Signal Received and
Transmitted
Drive 3G-S
Power Supply
Drive 3G-S
Quick Install Guide
For more information refer to full Install Guide at:
https://cellphonesignalbooster.us
Package Contents
Drive 3G-S Signal Booster
DC Power Supply
Mini-Magnet Antenna
USB Cable
TM
Cellular Signal Booster
Quick Install Diagram
460101
Outside Antenna Installation
Running Antenna Cable
Connect Cable to Drive 3G-S / Power Supply Cord
Need help?
www.WilsonElectronics.com
Tech Support 866-294-1660
Mon.- Fri. Hours: 7 am to 6 pm MST
Connect Power Supply
Dash Mount Bracket
Mounting Bracket
Advertisement
Related Manuals for weBoost 470106F
Summary of Contents for weBoost 470106F
- Page 1 Note: How It Works Your cell phone is an essential part of your life. weBoost is here to ensure you have seamless connections on all your cellular devices. THE SIGNAL BOOSTER UNIT IS DESIGNED FOR USE IN AN INDOOR, TEMPERATURE-CONTROLLED ENVIRONMENT (LESS THAN 150 DEGREES FAHRENHEIT).
- Page 2 Allow the area to dry. Peel the backing to expose the adhesive and press the bracket onto the desired location on NOTE: If lights are not green on your weBoost booster, please refer the dashboard. Attach the Drive 3G-S by aligning the rectangular...