Ricoh Aficio A080 Operating Instructions Manual page 74

User Tools (System Settings)
❖ ❖ ❖ ❖ Energy Saver
When no other key operations are performed, the machine switches to low
power mode after a specified period.
Note
❒ Default: 15 minutes
❒ Enter a time interval between 1 and 240 minutes in one minute increments
using the number keys.
❖ ❖ ❖ ❖ Panel Off Timer
Set the amount of time the machine waits before switching the panel off after
copying has finished or the last operation is performed.
Note
❒ Default: On, 1 minute
4
❒ When selecting [On], enter a time interval between 10 seconds to 240 min-
utes using the number keys.
❖ ❖ ❖ ❖ System Auto Reset
The System Reset setting automatically switches the display to its initial con-
dition when no operations are in progress, or when an interrupted job is
cleared. This setting determines the system reset interval. See p.54 "Function
Priority".
Note
❒ Default: On, 60 seconds
❒ The time can be set from 10 to 999 seconds, in one second increments, using
the number keys.
❖ ❖ ❖ ❖ Copier / Document Server Auto Reset Timer
Specifies the time to elapse before copier and Document Server modes reset.
Note
❒ If [Off] is selected, the machine does not automatically switch to the user
code entry screen.
❒ Default: On, 60 seconds
❒ The time can be set from 10 to 999 seconds, in one second increments, using
the number keys.
❖ ❖ ❖ ❖ Scanner Auto Reset Timer
Specifies the time to elapse before the scanner function resets.
Note
❒ If [Off] is selected, the machine does not automatically switch to the user
code entry screen.
❒ Default: On, 60 seconds
❒ The time can be set from 10 to 999 seconds, in one second increments, using
the number keys.
62