Ricoh Acifio MP C3002 How To Use Manual

How to use Ricoh Acifio MP C3002

1. Copy

a. Press the [Home] key on the top left of the control panel, and press the [Copier] icon on

the [Home] screen.

b. Make sure no previous settings remain.

When there are previous settings remaining, press the [Reset] key.

c. Place the originals.

d. Make desired settings.

e. Enter the number of copies with the number keys.

The maximum copy quantity that can be entered is 999.

Press the [Start] key.

g. When the copy job is finished, press the [Reset] key to clear the settings.

[Start] key

Table of Contents

Do you have a question about the Acifio MP C3002 and is the answer not in the manual?

Page 1 How to use Ricoh Acifio MP C3002 1. Copy a. Press the [Home] key on the top left of the control panel, and press the [Copier] icon on the [Home] screen. b. Make sure no previous settings remain. When there are previous settings remaining, press the [Reset] key.
Page 2 2. Scan to Email a. Press the [Home] key on the top left of the control panel, and press the [Scanner] icon on the [Home] screen. b. Make sure that no previous settings remain. If a previous setting remains, press the [Reset] key. c.
Page 3 e. Specify the destination. Press [Manual Entry] to input an Email address. To specify the e-mail sender, press [Sender Name]. g. Press the [Start] key.
Page 4 3. Scan to USB stick a. Plug your USB stick on the right side of the control panel. b. Press the [Home] key on the top left of the control panel, and press the [Scanner] icon on the [Home] screen. c.
Page 5 Press [Store File] and [Store to memory device]. g. Press the [Start] key.
Page 6 4. Print from USB stick a. Press the [Home] key on the top left of the control panel, and press the [Printer] icon on the [Home] screen. b. Press [Print from Memory Storage Device] c. Select a file and start printing.