Ricoh Aficio A080 Operating Instructions Manual page 67

❒ You can specify an output tray for each function. See the following sec-
tions:
• p.60 "Paper Tray Priority: Copier"
❖ ❖ ❖ ❖ Function Reset Timer
You can set the length of time the machine waits before changing modes
when using the multi-access function (see p.34 "Multi-Access"). This is useful
if you are making many copies and have to change settings for each copy. If
you set a longer reset period, you can prevent interruption from other func-
tions.
Note
❒ Default: Set Time (3 seconds)
❒ The Function Reset Timer setting is ignored if [Interleave Print] is set for
Print Priority (see p.54 "Print Priority").
❒ When you select [Set Time], enter the time (3–30 seconds, in 1 second incre-
ments) using the number keys.
❖ ❖ ❖ ❖ Interleave Print
You can set the timing for changing modes when [Print Priority] has been set to
[Interleave].
Note
❒ Default: 10 sheet(s)
❒ You can set the number from 1 to 20 sheets using the number keys.
❒ Values set may change depending on the timing of printing.
❖ ❖ ❖ ❖ Original Feed Delay 1
You can specify the duration of delay before an original is fed into the ma-
chine after being set. If originals frequently feed in slanted, or you are using
special originals, set the delay accordingly.
Note
❒ Default: 1 second
❒ The time can be set from 0 to 5 seconds.
❖ ❖ ❖ ❖ Original Feed Delay 2
You can specify the duration of the pause immediately after originals are first
fed into the machine. If originals frequently feed in slanted, or you are using
special originals, set the delay accordingly.
Note
❒ Default: 1 second
❒ The time can be set from 1 to 5 seconds.
Settings You Can Change with User Tools
4
55