[Text Display]; [Text Change]; [Menu Lock]; [Menu Lock Password] - Panasonic PT-VZ585N Operating Instructions Manual

[TEXT DISPLAY]

Overlap the security message (text) over the projecting image.
1) Press as to select [TEXT DISPLAY].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]

[TEXT CHANGE]

Register or change the displayed text when [TEXT DISPLAY] is set to [ON].
1) Press as to select [TEXT CHANGE].
2) Press the <ENTER> button.
f The [TEXT CHANGE] screen is displayed.
3) Press asqw to select the text, and press the <ENTER> button to enter the text.
4) Press asqw to select [OK], and press the <ENTER> button.
f The text is changed.

[MENU LOCK]

Display the menu by the <MENU> button and set whether or not to enable menu operations.
1) Press as to select [MENU LOCK].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
Note
f The factory default setting or the setting after executing the [PROJECTOR SETUP] menu → [INITIALIZE ALL] is set to [OFF]. Set it to [ON]
if necessary.
f When [MENU LOCK] is set to [ON], the [MENU LOCK PASSWORD] screen is displayed after pressing the <MENU> button. After entering
the set menu lock password, the menu operation is enabled. In this case, the menu operation will remain enabled until the projector enters
into standby mode.

[MENU LOCK PASSWORD]

Change the menu lock password.
1) Press as to select [MENU LOCK PASSWORD].
2) Press the <ENTER> button.
f The [MENU LOCK PASSWORD] screen is displayed.
3) Press asqw to select the text, and press the <ENTER> button to enter the text.
f Up to 16 characters can be input.
4) Press asqw to select [OK], and press the <ENTER> button.
f To cancel, select [CANCEL].
Attention
f The initial password is "AAAA" for the factory default setting or after executing the [PROJECTOR SETUP] menu → [INITIALIZE ALL].
f Change the password periodically and make it hard to guess.
96 - ENGLISH
Chapter 4 Settings - [SECURITY] menu
The security message will not be displayed.
Displays the text set at the [SECURITY] menu → [TEXT CHANGE].
Enables menu operations.
Disables menu operations.