Factory Default Setting; Following Setting Has Been Made As A Factory Default; [Dhcp] [Off]; [Ip Address] - Panasonic PT-VZ585N Operating Instructions Manual

r Factory default settings
f Following setting has been made as a factory default.
[SIMPLE]
[M-DIRECT]
[USER]
Operating the computer
1) Turn on the power of the computer.
2) Perform the network setting following the instruction of your network administrator.
f When the [NETWORK/USB] menu → [WIRELESS LAN] is set to [M-DIRECT], set the network setting of the
computer to "Obtain an IP address automatically".
f When the [NETWORK/USB] menu → [WIRELESS LAN] is set to [USER], make the network settings for the
computer and the projector following the instructions of your network administrator.
3) Connect the computer to the network set for the projectors.
f For Windows computers, click
following SSID as the connection destination.
g When the [NETWORK/USB] menu → [WIRELESS LAN] is set to [M-DIRECT]: the SSID set for the
projector
g When the [NETWORK/USB] menu → [WIRELESS LAN] is set to [USER]: the SSID of the access point in
use
For Mac, click
access point for the projector.
Note
f If you use wireless LAN connection utility that is standard for your OS, connect according to the operation procedure of the utility in use.
Chapter 5 Operation of Function - Network connection
[KEY]

[IP ADDRESS]

[SUBNET MASK]
[SSID]
[CHANNEL]
[KEY]
[SSID]
[AUTHENTICATION]
[ENCRYPTION]
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[DNS1] / [DNS2]
in the task tray (lower right of the computer screen), and select the
in the menu bar (upper right of the computer screen), then select the SSID set as the
Projxxxx
(Set it to the same string as the network ID. xxxx is a 4-digit number.)
192.168.12.100
255.255.255.0
M-DIRECTxxxx
(xxxx is the last 4 digits of the network ID.)
1
The same string as the SSID.
Panasonic Projector
[OPEN]
[NONE]
[OFF]
192.168.11.100
255.255.255.0
192.168.11.1
(Blank)
ENGLISH - 115