Panasonic PT-VZ585N Operating Instructions Manual page 30

r Connecting terminals
1 2
1 <COMPUTER 2 IN/1 OUT> terminal
This is the terminal to input RGB signals or YC
It can also output the signals input from <COMPUTER 1 IN>
terminal to an external device.
2 <COMPUTER 1 IN> terminal
This is the terminal to input RGB signals or YC
3 <HDMI 1 IN> terminal / <HDMI 2 IN> terminal
These are the terminals to input HDMI signal.
4 <USB B (DISPLAY)> terminal
This terminal is used to connect the projector to the computer
with a USB cable when you want to use the USB display function
of the application software "Wireless Manager ME6.4".
For details, refer to the "Operating Instructions-Wireless Manager
ME6.4" in the CD-ROM.
5 <USB A (VIEWER)> terminal
This is the terminal to attach the USB memory when using the
Memory Viewer function or the Pairing function.
Æ
( pages 140, 147)
Attention
f When a LAN cable is directly connected to the projector, the network connection must be made indoors.
30 - ENGLISH
Chapter 1 Preparation - About your projector
3
7 8
C /YP P signals.
B R B R
C /YP P signals.
B R B R
4 5
9
6 <DIGITAL LINK/LAN> terminal
This is a terminal to connect a device that transfer video
signal or audio signal via the LAN terminal. Also, this is the LAN
terminal to connect to the network.
7 <SERIAL IN> terminal
This is the RS-232C compatible terminal to externally control the
projector by connecting a computer.
8 <VIDEO IN> terminal
This is the terminal to input video signals.
9 <AUDIO IN 3> terminal
This is the terminal to input audio signals.
Left input <L> and right input <R> are provided for the <AUDIO
IN 3> terminal.
10 <AUDIO IN 1> terminal / <AUDIO IN 2> terminal
These are the terminals to input audio signals.
11 <VARIABLE AUDIO OUT> terminal
This is the terminal to output the input audio signal.
6
10 11