About Your Projector; Remote Control - Panasonic PT-VX605N Operating Instructions Manual

About your projector

Remote control

1 Power button <v/b>
Sets the projector to the state where the projector is
switched off (standby mode). Also starts projection when
the power is switched off (standby mode).
2 <AUTO SETUP/CANCEL> button
Automatically adjusts the image display position while
Æ
projecting the image.(
acts as <CANCEL> button when using the MEMORY
VIEWER function.
3 <MENU> button
Displays or hides the main menu. (
4 <ENTER> button/asq(VOL -) w(VOL+) buttons
Navigate the menu display. And use qw to adjust the
volume level, use as to page up or page down files
such as PowerPoint through wireless manager.
®
5 <DEFAULT> button
Resets the content of the sub-menu to the factory
Æ
default. ( page 54)
6 <MEMORY VIEWER> button
Switches the MEMORY VIEWER signal to project.
( Æ page 48)
7 <COMPUTER 1> button
Switches the COMPUTER1 signal to project.
8 <COMPUTER 2> button
Switches the COMPUTER2 signal to project.
9 <HDMI 1> button
Switches the HDMI1 signal to project.
10 <MUTE> button
Used to mute the audio. (
11 <D.ZOOM +/-> buttons
Zoom in and out the images. (
12 <AV MUTE> button
Used to turn off the audio and video temporarily.
Æ
( page 50)
13 <ID SET> button
Sets the ID number of the remote control to use for a
system using multiple projectors. (
24 - ENGLISH
Chapter 1 Preparation - About your projector
Front
r
1
2
3
4
5
6
7
8
9
10
11
12
13
page 46) In addition, it
Æ
page 53)
Æ
page 50)
Æ
page 49)
Æ
page 50)
Top
r
14
15
16
17
18
Bottom
r
19
28
20
21
22
23
24
25
26
14 Remote control indicator
Flashes if any button in the remote control is pressed.
15 <SCREEN ADJ> button
You can correct various types of distortion in a projected
Æ
image.( page 46)
16 <RETURN> button
Return to the previous menu or cancel the setting.
17 <FUNCTION> button
Assigns a frequently used operation as a shortcut button.
Æ
( page 47)
18 <Panasonic APP> button
Switches the Panasonic APPLICATION signal to project.
Æ
( page 48)
19 <Miracast> button
Switches the Miracast signal to project. (
20 <VIDEO> button
Switches the VIDEO signal to project.
21 <DIGITAL LINK> button
Switches the DIGITAL LINK signal to project.
22 <HDMI 2> button
Switches the HDMI2 signal to project.
23 <FREEZE> button
Pauses the projected image and mute the audio
Æ
temporarily. ( page 49)
24 Number buttons
Act as number buttons. Use these buttons when setting
the remote control codes or entering the password.
<P-TIMER> button
25
Operate the P-TIMER function. (
<ID ALL> button
26
Used to simultaneously control all the projectors with one
remote control for a system using multiple projectors.
( Æ page 50)
27 Remote control signal emitters
28 This jack is not used for these projector models.
27
Æ
page 48)
Æ
page 50)