Table of Contents
Advertisement
FB100AS-F User Guide
(4) If the <Figure 12-2> comes up, set each blank (Red borders N.1~2) to (COM PORT –
connected to
click the OPEN button (Red borders N.3), then
lights become green as shown on <Figure 12-3> .
If the lights doesn't change into green, check the COM PORT and execute BTConfig tool once again.
(5) If READ button (blue borders) is clicked after BTConfig tool is connected to products as shown on
<Figure 12-3>, MENU Buttons (<Figure 12-4> red borders N.1) are activated.
1 BLUETOOTH PARAMETERS:
2 Set-up window:
change Set-up Groups and values
1 READ button:
read set values. (During first initialization, value should be READ after BTConfig tools are
connected to products)
2 WRITE button:
Save set values. (Serial port is automatically off after saving is completely.)
3 INIT button:
Reset all the set values to Factory fix points.
(6) If you select any PARAMETERS(<Figure 12-4> red borders N.1), the window for Value Check and
Set-up comes up on the right
(7) Save the set values by clicking the WRITE button after Set-up completed.
Version 1.0
FB100AS-F, BAUDRATE – 9600, PARITY BIT – None, STOP BIT – 1). After the set-up,
Set-up Group Button
<Figure 12-4 BTConfig tool Set-up>
How to complete PC Configuration?
12
Serial Connection
Ready To Set
and
Port
(Red borders N.1)
Page 24 / 30
Advertisement
Table of Contents
