Panasonic KX-TGE662 Operating Instructions Manual page 64

Using Bluetooth® Devices
Answering landline calls with your
headset
To answer a landline call, press your
headset's button.
When you finish talking, press your headset's
button.
Note:
R If you cannot hang up the call using your
headset:
– press M N (STOP) on the base unit.
(KX-TGE660 series: page 4)
– press MZN on the base unit 2 times.
(KX-TGE670 series: page 4)
Call sharing between your headset
and the handset
Important:
R To activate this feature, you should set call
sharing mode to on beforehand (page 51).
n While the handset is on a landline call:
To join the conversation with your headset,
press your headset's button.
n While your headset is on a landline call:
To join the conversation with the handset,
press M N.
Switching between the base unit and
your headset
You can switch between the base unit and
your headset:
– during a landline call with the base unit
speakerphone. (KX-TGE670 series: page 4)
– during an intercom call between the base
unit and handset. (KX-TGE670 series:
page 4)
– while listening to messages recorded on
the base unit answering system.
n To switch to your headset:
Turn on the headset.
n To switch to the base unit (KX-TGE670
series: page 4):
Press MZN on the base unit.
For assistance, please visit http://shop.panasonic.com/support
64
Adjusting your headset receiver
volume
Base unit
Press MjN or MkN repeatedly while using your
headset.
Note:
R Depending on your headset, the receiver
volume may not be adjustable.