Panasonic KX-TGE662 Operating Instructions Manual page 38

Automated call block
Changing the access code
If the unit answers undesirable calls such as
robocalls even though the automated call
block function is on, change the access code
(3 digits max.). The default setting is "1".
1
MCALL BLOCKN a MSELECTN
2
MbN: "Access code" a MSELECTN
3
MCLEARN
4
Enter the new access code. a MSAVEN
a MOFFN
Displaying and clearing the
blocked call count
The total number of blocked calls (up to
65,000) will be displayed.
1
MCALL BLOCKN a MSELECTN
2
MbN: "Blocked calls count" a
MSELECTN
R To exit, press MOFFN.
3
MCLEARN
4
MbN: "Yes" a MSELECTN a MOFFN
Adding to the allow name list
You can allow specific callers to pass through
by adding the caller's name to the allow name
list even if you do not know the caller's
number.
You can store up to 100 names (16 characters
max.). If the name stored in the allow name list
matches the incoming Caller ID, the unit rings.
Callers listed in the allow name list are not
required to enter the access code.
Adding allowed names from the
caller list
n When a cellular phone is paired:
1
MCN CID
2
MbN: Select the desired entry. a
MSELECTN
3
MSAVEN
4
MbN: "Allow name" a MSELECTN
For assistance, please visit http://shop.panasonic.com/support
38
n When a cellular phone is not paired:
1
MCN CID
2
MbN: Select the desired entry. a
MMENUN
3
MbN: "Save allow name" a
MSELECTN
Viewing/erasing an entry
1
MCALL BLOCKN a MSELECTN
2
MbN: "Allow name list" a MSELECTN
3
MbN: Select the desired entry.
R After viewing, press MOFFN to exit.
4
MERASEN a MbN: "Yes" a MSELECTN
a MOFFN
Erasing all entries
1
MCALL BLOCKN a MSELECTN
2
MbN: "Allow name list" a MSELECTN
3
MERASEN a MbN: "Yes" a MSELECTN
4
MbN: "Yes" a MSELECTN a MOFFN
Greeting message for automated
call block
When the unit answers a call, a greeting
message is played to the caller.
You can use either:
– your own greeting message and
pre-recorded greeting message
– a pre-recorded greeting message
Recording a greeting message for
automated call block
Using this feature, the unit can play your own
greeting message and pre-recorded greeting
message.
Example of your own greeting message:
"Hi, you have reached xxxxxxx (Name)."
"Thank you for your calling, You have reached
xxxxxxx (Name)."
"Hi, you have reached the xxxx (Name)
residence."
1
MCALL BLOCKN a MSELECTN