Installing The Advdlx10 A Video System - Advent ADVDLX10A Installation Manual

10.1” overhead led backlit lcd monitor with dvd player
Table of Contents

Advertisement

INSTALLING THE ADVDLX10 A VIDEO SYSTEM

1.
Connect the 6 pin harness to the unit and make the connections to
the vehicle.
2.
Connect the red and black power wires of the Power Harness to
vehicle's electrical system by tapping into an accessory hot line and
a good ground.
3.
If connecting to an external source, connect the 5 Pin AV Input
Harness (112-4259 Blue Connector) to provide the AV signals input.
4.
If connecting to an external source, connect the if used 5 Pin AV
Output Harness (112-4260 White Connector) to provide the AV
signals output.
5.
A/V Source Definitions:
NOTE: The antenna has been designed for optimal performance.
When installing the unit, position the antenna for best reception.
R
VOXX ELECTRONICS CORP.
150 Marcus Blvd., Hauppauge, NY 11788
Technical Assistance: 1-800-225-6074
MODEL NO. : ADVDLX10 A
Power + Dome Light 6-Pin Harness
Connector
Signal Name
Color
CON6
LAMP-AUTO
VIO/BRN
(BLACK)
LAMP-ON
RED/BLK
Inspected By:
LAMP-COMMON
BLK/RED
POWER +12v (SW)
RED
POWER GROUND
BLACK
AV Input 5-Pin Harness
Connector
Signal Name
Color
CON5
VIDEO-IN
YELLOW
(BLUE)
AUDIO L-IN
WHITE
AUDIO R-IN
RED
AV Output 5-Pin Harness
Connector
Signal Name
Color
CON2
VIDEO-OUT
YELLOW
(WHITE )
AUDIO L-OUT
WHITE
AUDIO R-OUT
RED
132-7888
Made in China
This device complies with FCC Rules P art 15.
Operation is subject to the following two
conditions : (1) This device may not cause
harmful interference and (2) This device must
accept any interference that may be received,
including interference that may cause
undesired operation.
This product is Class 1 Laser Product and
complies with FDA Rules 21 CFR Chapter 1,
Subchapter J.
Patented, refer to www.voxxintl.com/company/patents
FCC ID : ATI9R3ODM21012
WIRING DIAGRAM
14
Verify all system functions before final mounting of the finished
assembly.
DVD - Built in DVD/USB
AV - Signal Harness (P/N 112-4259 Blue Connector) to the 3 RCA
Jack Pigtail is used for AV input.
AUX - AUX input (P/N 112B3227) 3.5mm jack to RCA Cable
Antenna for
Wireless FM Mod.
See Antenna Note
Optional Relay Box
6 Pin Power/Dome Light
Harness (P/N 112-4270)
5 Pin AV input Harness
(P/N 112-4259 Blue Connector)
5 Pin AV output Harness
(P/N 112-4260 White Connector)

Advertisement

Table of Contents
loading

Table of Contents