Advent ADV10A Operation Manual

10.1" overhead lcd monitor with dvd player

Hide thumbs Also See for ADV10A:

Installation manual (13 pages)

Table Of Contents

Summary of Contents for Advent ADV10A

Page 1 ADV10A 10.1" OVERHEAD LCD MONITOR WITH DVD PLAYER OPERATION MANUAL 128-8933...
Page 2: Important Notice
nstallation of overhead products requires careful planning and preparation. Be extremely careful when working on a vehicle with side curtain air bags. Do not route wires near any portion of the side curtain air bag assemblies. This includes any anchor points in A, B, C or D pillars of the vehicle.
Page 3: Safety Precaution
Congratulations Congratulations on your purchase of the ADVENT ADV10A DVD Player with drop-down video / monitor. The ADV10A has been designed to give you and your family many years of video entertainment in the mobile environment. Please read the directions that follow to familiarize yourself with the product to ensure that you obtain the best results from your equipment.
Page 4 CONTROLS AND INDICATORS DIAGRAM (FRONT VIEW) 1. POWER ( ) Control Used to turn the system on/off (standby). 2. Infrared Transmitter/Remote Sensor (Location) 3. Source Select (S) Use to select one of the two sources: DVD, AV1/AUX 4. PLAY ( ) Control This control is used to start playback of a disc.
Page 5: Controls And Indicators Diagram
4. Infrared Transmitter/Remote Sensor (Location) he ADV10A has an option that allows the user to select from two IR transmit and receive codes (M1 or M2). This feature can be used when using two ADV10As in the same installation or if the vehicle has a RSA (Rear Seat Audio) that uses an “A”...
Page 6 REMOTE CONTROL OPERATION Initial Use When purchased the remote control has a battery installed with a Pull Tab to prevent battery discharge. Remove the Pull Tab before attempting to use the remote. CR2025 Battery Replacement 1. Remove the battery holder. 2.
Page 7 Function control is available on the unit and the Remote Control. Function not available in this model. 1. POWER* Press this button to turn the unit ON and OFF. MONITOR SELECT M1 Button – Set the remote control code to allow control of the unit in M1 mode. M2 Button** –...
Page 8 9. ENTER Used to implement a selected setting or menu option. 10. DISPLAY Press to display the current disc information while the disc is playing. Press the cursor ( Title/Chapter selection use the numeric buttons to enter the desired Title /Chapter selection. 11.
Page 9 19. STOP ( )* Press to stop playback. (Playback will resume from the point it is stopped). Press twice at once to stop playback fully. (Playback will resume from the beginning of the disc). 20. SCAN FORWARD ( ) Press to search in a forward direction. Press repeatedly to change the search speed from 2, 4, 8, 16 times and normal speed. 21.
Page 10 26. ZOOM Press this button to enlarge the picture when playing a DVD disc. Press ZOOM button DVD player perform Once Q1- Enlarge the picture 2 times of the original size Second Q2- Enlarge the picture 3 times of the original size Third Q3- Enlarge the picture 4 times of the original size Forth...
Page 11: Turning The Unit On Or Off
TURNING THE UNIT ON OR OFF 1. Push in the Screen Release button to unlock the LCD screen. The screen will drop down slightly. 2. Pivot the screen downward until a comfortable viewing angle is reached. The hinge friction will hold the screen in position while the system is in use.
Page 12: System Menu Settings And Adjustments
SYSTEM MENU SETTINGS AND ADJUSTMENTS The System Menu contains features and options that let you customize your system. For example, you can change the screen mode display, OSD language, and source default. Using the System Menu 1) Press the TV button and then the SYSTEM MENU button on the remote. The main page of the system menu will appear on screen. 2) Use the cursor buttons to select the desired item in the main page and press the ENTER button to select.
Page 13 FMM SELECT This function allows the user to listen to audio through the vehicle’s radio. FMM ON - Turns the wireless FM Modulator on if audio playback through your vehicle’s radio is preferred. FMM OFF - Turns the wireless FM Modulator off. FMM SELECT - Selects the wireless FM Modulator Frequency (CH1 88.1MHz, CH2 88.3MHz, CH3 88.5MHz, CH4 88.7MHz, Ch5 88.9MHz, Ch6 89.1MHz, CH7 89.3MHz, CH8 89.5MHz, CH9 89.7MHz, CH10 89.9MHz, CH11 90.1MHz, CH12 90.3MHz, CH13 90.5MHz, CH14 90.7MHz, CH15 90.9MHz, CH16 91.1MHz) To listen to the audio, turn on the wireless FM Modulator, then tune your vehicle’s radio to the...
Page 14 SOURCE DEFAULT DVD This allows the user to set the system default source to DVD. Notes: • If source default is set to ON, every time the unit is turned off then on, the unit will power up and automatically switch the source to DVD. If source default is set to OFF and the unit is turned off then on, the unit will power up in whatever source was last selected.
Page 15 DVD SETUP MENU SETTINGS AND ADJUSTMENTS The DVD Setup Menu contains features and options that let you customize your DVD player. For example, you can set a language for the on-screen display or prevent children from viewing DVD playback of adult DVD Titles. Using the Setup Menu 1.
Page 16 DVD SUBTITLE SETUP 1. Select "SUBTITLE" using the button, then press the 2. Select the subtitle you desire using the 3. Press the button to return. Note: The subtitle selection is only available for discs that are recorded in the above listed languages. If the selected, language is not available, the player will play and display on the screen the original language contained in the disc.
Page 17 DVD RATING SETUP Parental This item allows you to limit the content of movie playback from G to Adult. The lower the value, the more strict the control. 1. G 2. PG 3. PG – 13 4. R 5. NC – 17 6.
Page 18: Playing Dvds
Load Factory This option allows you to reset all options to factory settings. Note: This function will not affect the Rating control settings. Screen Saver This option allows you to set the Screen Saver mode. ON - Screen saver will appear OFF - Screen saver will not appear Note: The DVD player will enter Screen Saver mode if the unit is inactive for approximately 2 minutes.
Page 19: Playing Mp3 Discs
PLAYING MP3 DISCS MP3 is a format for storing digital audio. An audio CD-quality song can be compressed into the MP3 format with very little loss of quality, while taking up much less space. CD-R discs that have been encoded in MP3 format can be played on DVD player. The DVD player plays the songs in the order they were burned on to the disc.
Page 20 Repeat: play repetitively Repeat function has 4 options : Off, Single, Folder, All. Move cursor to Repeat function and press ENTER, Each time ENTER is pressed the unit will cycle through the available options. Off/Single/Folder/All are displayed in that order. Repeat default is Off. Turn off repeat function Single - Repeat the song being played until STOP is pressed.
Page 21: Dvd Basics
Clear program To clear the selected song files, press the STOP button twice during playback mode. Move the cursor to the Edit mode function and press ENTER. After Edit mode is selected, move cursor to selected songs list and select the songs which you want to delete. Press ENTER. A check mark will appear to the left of the selected song.
Page 22 Types of Discs your DVD will play Your system will play the following types of discs: • DVD* disc - DVD discs which contain video. • Audio disc - Audio CDs contain musical or sound content only. • MP3 disc - A disc that contains audio files (for example, a CD-R with downloaded MP3 files). *Note: This system is capable of playing most recordable DVD formats.
Page 23: Overhead Dome Lights
WIRELESS HEADPHONES The ADV10A includes a built-in infrared transmitter for use with the supplied wireless headphones. The headphone volume is adjusted using the controls on each headset. Any number of wireless headphones may be used but they must be used within a line of sight from the transmitter, as infrared transmissions, like visible light, travel only in a straight line.
Page 24: Troubleshooting
AV Out The unit provides an AV output for optional video monitor(s). This output will provide the AV signals that duplicate the picture/audio being processed by the unit to an additional monitor or video display. Please see your installer for more information. TROUBLESHOOTING PROBLEM IR remote inoperative...
Page 25 PROBLEM Can’t advance through a movie Not allowed at the moment Picture is distorted No forward or reverse scan SOLUTION It can’t advance through the opening credits and warning information that appear at the beginning of movies because the disc is programmed to prohibit that action. The feature or action cannot be completed at this time because: 1.
Page 26 REPLACEMENT PARTS Remote Control SPECIFICATIONS 136-4840 LCD Backlighting Resolution Pixels Operation Temperature Storage Temperature Back Light Life Video Display System Video Output Power Source Dimensions Specifications are subject to change without notice. 800 (RGB) x 480 1,152,000 32 ~131º F (0 ~ 55º C) -4 ~ 158º...
Page 27 If your new vehicle’s radio, CD/DVD player is covered by the manufacturer’s warranty for a period of 48 months as set forth in the OEM Warranty Booklet, the company will extend the Advent Mobile Video product warranty for the same period of time. This is not applicable to extended warranty purchases beyond the original manufacturer’s warranty.

Advent ADV10A Operation Manual

Table of Contents

Related Manuals for Advent ADV10A

Summary of Contents for Advent ADV10A

Table of Contents