Table of Contents
Advertisement
2) Wait for the scan tool to display the Component Test menu.
3) If the test has been initiated by the vehicle, a confirmation
message will be displayed on the screen.
Some vehicles do not allow scan tools to control vehicle
systems or components. If the vehicle under test does not
support the EVAP Leak Test, an advisory message is
displayed on the screen.
Component Test
Evap Leak Test
Figure 5.47
Component Test
Command Sent!
Press any key to con.
Figure 5.48
.............Component Test
The selected mode is
not supported
Press any key to con.
Figure 5.49
62
?
Advertisement
Table of Contents
