Table of Contents
Advertisement
7.
CIRCUIT TEST fUNCTION .......................................................... 71
7.1
Auto ............................................................................................... 71
7.2
DC Voltage..................................................................................... 71
7.3
AC Voltage ..................................................................................... 72
7.4
Continuity ....................................................................................... 72
7.5
Diodes............................................................................................ 74
7.6
Current ........................................................................................... 74
7.7
Current ........................................................................................... 75
8.
START TEST ................................................................................. 76
8.1
Starter Test .................................................................................... 76
8.2
Charging System Test .................................................................... 80
9.
PRINT DATA .................................................................................. 85
10.
WARRANTy AND SERVICE ......................................................... 87
10.1
Limited One Year Warranty ............................................................ 87
10.2 Service Procedures ....................................................................... 87
Recycle unwanted materials instead of disposing of them as waste. Alltools,
accessories and packaging should be sorted and taken to a recycle centre
for disposal of in a manner which is compatible with the environment.
W hen the product is no longer required, it must be disposed of in an
environmentally protective way.
NOTE: The TA500 contains a lithium-ion battery which should be disposed
of in an environmentally appropriate way.
TO REmOVE BATTERy:
1 Remove rubber bumper from around tool.
2) Remove the six cross-head screws from casing.
3) Split casing.
4) Unplug the battery from PCB and prize battery away from case.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will give you years of
trouble free performance, if these instructions are carefully followed and the product is correctly maintained.
© Jack Sealey Limited
Environmental Protection
Battery Removal
Original Language Version
TA500
Issue No.1 18/02/13
Advertisement
Table of Contents
