Turning Off The Projector - Canon LV-7285 User Manual

 Turning off the Projector

To turn off the projector:
1. Press the POWER (
remote control. The "Push POWER button again to turn off
power. /Carbon savings-Session 23.220(g-CO2)" message
will appear. See page 39. Amount of carbon emission reduc-
tion will be displayed only when [Lamp mode] is set to [Quiet].
When [Lamp mode] is set to [Normal], the amount of carbon
emission reduction will be displayed as "00.000 (g-CO2)".
2. Press the POWER button again.
The projector turns off and goes into standby mode.
When in standby mode, the POWER indicator will light or-
ange (the cooling fans stop at the same time) and the STA-
TUS indicator will light green.
3. Turn off the Main Power switch. The POWER indicator will go
out.
The projector has a feature called"Direct Power Off". This
feature allows the projector to be turned off (even when
projecting an image) by using the Main Power Switch or dis-
connecting the AC power supply. To turn off the AC power
supply when the projector is powered on, use the Main
Power Switch, or a power strip equipped with a switch and a
breaker.
NOTE: Do not turn off the main power within 10 seconds of making adjust-
ment or setting changes and closing the menu.
Doing so can cause loss of adjustments and settings.
CAUTION:
Parts of the projector will become heated during operation. Use
caution when picking up the projector immediately after it has
been operating.
CAUTION:
• The projector cannot be turned off for 60 seconds after the
lamp is turned on and while the POWER indicator is blinking
green. Doing so could cause premature lamp failure.
) button on the projector cabinet or the
3. Projecting an Image (Basic Operation)
35
POWER
IMAGE
ASPECT
MENU
Power On Standby
Steady Steady
green light orange light
INFO.
INPUT AUTO PC
BLANK