Connecting Your Audio-Video Equipment With Component Output - Canon LV-7285 User Manual

Connecting Your Audio-Video Equipment with Component Output

Use audio equipment for stereo sound.
Optional 15-pin - to - rCa (female)
 3 cable (lV-Ca32)
Component video rCa  3
cable (not supplied)
A component signal will be automatically displayed. If not, from the menu, select [Setup] → [Options(1)] → [Input
signal select] or [Computer 2 (Analog)] → [Computer 1], and then select [COMPONENT].
• Select the input name for its appropriate input connector after turning on the projector.
Input connector
ANALOG IN-1
DIGITAL IN /
ANALOG IN-2
NOTE: Refer to your DVD player's owner's manual for more information about your DVD player's video output requirements.
ANALOG IN-1
Y Cb Cr L R
Component AUDIO OUT
Use the INPUT button on the projector cabinet or the remote
control to select the appropriate input from the menu.
2. Installation and Connections
AUDIO IN
AUDIO IN
L
audio cable (not supplied)
Computer 1
Computer 2 (Analog)
19
R