Table of Contents
Advertisement
i.
To search for projectors, simply click Search to list all the projectors
on the same local area network. Click the desired projectors in the
Search result list, and click Connect. You can also type a desired
projector name and click Search.
ii.
You can also type the projector IP address and click Connect to con-
nect the projector directly.
2. You can choose a capture mode and display location from here.
i.
To display a full screen, click FullScreen.
ii.
If you wish to change the square, click Alterable.
iii. If there are multiple computers connected to the projector, you can
decide a display zone by clicking All, L, R, 1, 2, 3 or 4.
3. You can manage the connected projectors listed under Device
Management.
Under a conference mode:
1. Only the administrator can take control.
2. A projector can display up to 4 computer screens.
EN-62
Advertisement
Table of Contents
