Advertisement
Connector Panel
Note: Cable tie-down points can be used to tie down the cables with tie wraps. Simply loop the tie wraps through the cable tie-down points and around the
cable to secure cable connections.
Touch Monitor Connections
1. Connect one end of the HDMI or VGA video cable to the monitor's HDMI/VGA input connector and the
other end to your HDMI/VGA video source. (Tighten the video cable's screws on the VGA connector for
best performance.)
2. Connect the USB touch cable between the monitor's USB connector and your PC's USB port.
Connect the audio cable between the monitor's Audio Out and your audio source.
3.
4. Connect the power adaptor's input connector to the power source. Connect the power adaptor's DC output connector to the monitor's input power jack.
5. The touch monitor ships in an OFF state. Press the power button to turn it on.
User Manual ET1903LM, ET2203LM, ET2403LM, ET2703LM
6
Advertisement
