Advertisement
Step 7
M20
The door jambs reinforce the door
opening and provide an attractive
trim. The splice posts support the
wall.
1
Position a rear splice post at the
center of the rear wall and fasten us-
ing bolts and nuts into rear wall angle
and screws into rear oor frame.
Hint: Measure or count holes to
determine if post is centered on rear.
2
Fasten side splice posts to the
sides of building in the same manner.
Angled end of post must be on top.
3
Fasten the top of the door jambs
to the door track with 2 screws. Do
the same for the bottom into frame.
Notched edge faces toward center
of building.
Parts Needed For
Splice Post/Door Jamb
NOTCHED EDGE
MUST FACE CENTER
OF BUILDING
8717
STEP
3
8717
8734
8718
Washer
20
8718 Rear Splice Post (1)
8734 Side Splice Post (2)
8717 Door Jamb (2)
STEP
1
ANGLED END OF
SPLICE POST MUST
BE ON TOP
8734
STEP
2
Advertisement
