Table of Contents
Advertisement
3. Using the Baby Monitor
3.1
Setting Up
• Place the Baby Unit in a convenient location (e.g. on a table) and point the
camera lens towards the area you want to monitor.
• Adjust the angle of the Baby Unit's camera until you are satisfied with the
image shown on the Parent Unit.
NOTE
Do not place the Baby Unit within the baby's reach! If there is interference with
the picture or sound, try moving the units to different locations, and ensure they
are not close to other electrical equipment.
3.2
Night Vision Mode
The Baby Unit has 8 high-intensity infrared LEDs for picking up clear images in
the dark. When the built-in photo sensor on the top of the Unit detects a low level
of ambient light, the LEDs will automatically activate and the screen on the
Parent Unit will display in black and white. The
top of the screen.
3.3
Talk Mode
Press and hold the TALK button
the Baby Unit's loudspeaker.
T
The
icon will be displayed at the top of the LCD screen.
3.4
Video ON/OFF
V
Press
VIDEO On/Off button to turn the LCD screen on or off, whilst still
leaving the audio monitor on.
3.5
Temperature Display (HH °C / °F or LL °C / °F)
The temperature reading from the temperature sensor at the back of the Baby
Unit will be displayed at the top of the LCD screen. The readings will turn RED if
the temperature goes above 29°C / 84°F or below 14°C / 57°F. The reading will
change to HH °C / °F if the temperature goes above 36°C / 97°F. The reading
will change to LL °C / °F if the temperature goes below 1°C / 34°F.
14
T
on the Parent Unit to talk to your baby through
icon will be displayed at the
Using the Baby Monitor
Advertisement
Table of Contents
