Camera Control; Add (Pair) A Camera; View A Camera - Motorola MBP844CONNECT User Manual

4.6

Camera Control

4.6.1

Add (pair) a camera

1. Press the M button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until
the del/
+
3. Press the + UP button or - DOWN button to select
O button to confirm.
4. Camera
button to select the desired Camera, and press the O button to start
searching for a camera unit.
Note: If a camera is currently paired with the Parent Unit, its camera
location (with a * against it) cannot be selected for a new registration.
5. Press and hold the PAIR button on the underside of the Baby Unit until the
Parent Unit finds the camera, beeps and PAIR OK appears on the screen.
The video from the camera will then appear.
NOTE
A camera can only be registered to one Parent Unit at any one time.
4.6.2

View a camera

1. Press the M button and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until
the del/
+
3. Press the + UP button or - DOWN button to select
the O button to confirm.
4. Camera
button to select the desired camera, and press the O button to view the
picture from that camera.
Note: Only camera locations with a * can be selected.
TIP
You can also press the O button repeatedly to select the available camera
options from
16
add/ view/
will pop up. Press the + UP button or - DOWN
add/ view/
will pop up. Press the + UP button or - DOWN
scan.
,
scan menu will pop up.
+
scan menu will pop up.
is highlighted, and
add, and press the
is highlighted, and
view, and press
Parent Unit Menu Options