Argox AS-8020 Manual page 9

imager should emit a beep indicating that the barcode
has been scanned and transmitted to the cradle
successfully.
Connecting Scanner to PC via Bluetooth USB Dongle
The cordless scanner is allowed to connect PC via Bluetooth
USB dongle.
1. Scan the following barcodes to set scanner to Bluetooth
connection mode, with PIN code as 0000 or refer to the
manual page 22
code assigned to the target Bluetooth device
Cradle/Dongle connection auto detection – The imager
can be linked to either a cradle or other Bluetooth
enabled devices.
Set PIN code to 0000
2. After well-connecting Bluetooth dongle to PC, find the
blue-tooth sign on Taskbar; double-click on it to bring out
the Bluetooth Devices prompt.
nd
to set any four-to-six character PIN
9