Table of Contents
Advertisement
Off Timer
Off
Timer: Turn on
Off Timer
mode.
Turn Off
After: The off timer can be set within a range of 1 to 23 hours. The product will automatically
power off after the specified number of hours.
― This option is only available when
Off Timer
― For products for the market in some regions, the
product powers on. This is done in accordance with power supply regulations. If you do not want the timer to
activate, go to
→
System
and set
Off Timer
PC/AV Mode
Set
PC/AV Mode
to AV. The picture size will be enlarged.
This option is useful when you view a movie.
•
Set to
PC
when connected to a PC.
•
Set to
AV
when connected to an AV device.
― Supplied for the wide models only such as 16:9 or 16:10.
― If the monitor is in HDMI1, HDMI2,
DisplayPort
mode activates, press the JOG button to display the function-button screen and then select the
can select
PC
or AV.
is set to On.
Off Timer
is set to automatically activate 4 hours after the
to Off.
mode and the screen says
Check Signal Cable
DisplayPort Ver.
Select your Displayport.
― Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.
― If the monitor (when set to HDMI1,
message
Check Signal Cable
button screen and then select the
― If setting the
DisplayPort Ver.
maximum output refreshing rate of the display cards cannot achieve the level of 120 Hz/144 Hz.
Source Detection
Select either
Auto
or
or power saving
icon. You
HDMI2
or DisplayPort) is in power saving mode or is displaying the
or power saving mode activates, press the JOG button to display the function-
button to display the On Screen Display (OSD). You can select
to 1.1, for the bandwidth limitation of the DisplayPort 1.1 protocol, the actual
Manual
as the method to recognize input signal.
1.1
or 1.2↑.
41
Advertisement
Table of Contents
