Tidying Up the Connected Cables (S27HG50QQ* model only)
1
Stand assembly is complete.
Adjust the screen following the arrow
direction.
6
Open the COVER-STAND NECK LEFT, and
rotate the open part at the bottom.
2
Rotate the machine to the highest
Connect the corresponding cables.
vertical position.
― The monitor may get damaged if you
rotate the screen without tilt, or counter
clockwise direction
7
Place the corresponding cables into
Cover the COVER-STAND NECK LEFT.
the stand-neck holder. Do not stretch
the cable. Three cables in one holder is
recommended.
3
4
Arrange the cables against the bend
tendency of the cables and pull the
cables out of the COVER-REAR SUB
grooves.
8
9
Rotate the machine to the horizontal
position.
5
Cover the COVER-REAR SUB.
10
Arrange the external cables.
28