Advertisement
Quick Links
Owner's Guide and Installation Manual
4MC20XX Series Fan
UL Model No. : 4MC20
Attach sales receipt to this card and retain as your proof of purchase
RETAILER NAME:
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
4.5 kgs
9.9 lbs
Total fan weight
Advertisement
Related Manuals for Monte Carlo Fan Company Mini 4MC20BS
Summary of Contents for Monte Carlo Fan Company Mini 4MC20BS
- Page 1 Owner’s Guide and Installation Manual 4MC20XX Series Fan UL Model No. : 4MC20 Attach sales receipt to this card and retain as your proof of purchase RETAILER NAME: DATE OF PURCHASE: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 4.5 kgs 9.9 lbs Total fan weight...
- Page 2 All set screws must be checked and tightened where necessary before installation. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers. Customer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2013 Monte Carlo Fan Company 6/15/2013...
-
Page 3: Safety Cable Installation
Ball. This must be done to prevent the fan body from move if present. Cable in the U.S., Do Not Remove Knockouts In rotating when the blades are in motion. The Outlet Box. © 2013 Monte Carlo Fan Company 6/15/2013... - Page 4 Install rubber pad between fan Remove side covers from canopy ex- Pass leadwires and safety cable body and canopy. posing 4 holes. 2 closed holes and 2 through the canopy. open “L” shape holes. © 2013 Monte Carlo Fan Company 6/15/2013...
- Page 5 Install the screws that were not Repeat this process 3 more times until all other side of the outlet box. installed from earlier step. Tighten securely. blades are assembled. © 2013 Monte Carlo Fan Company 6/15/2013...
- Page 6 Install switch cap to fan using the 3 motor screws provided. Tighten housing and save for use later. screws provided. Tighten securely. screws securely. Connect the plug from fan to switch house plug. © 2013 Monte Carlo Fan Company 6/15/2013...
- Page 7 2.Check for loose or disconnected wires in fan switch housing. 3.Check for loose or disconnected wires in light kit. 4.Check for faulty light bulbs. CAUTION: Make sure main power is turned off before entering switch housing. © 2013 Monte Carlo Fan Company 6/15/2013...
- Page 8 Dec.2011 New formate Jan.2012 Update customer service phone number Jun.2013 Update for CUL regulation May.2017 Update to remove fiber washer...