Useful Functions; Enjoying 3D Images; Setting 3D Images; If The 3D Image Cannot Be Viewed - Epson EH-TW5950 User Manual

Useful Functions

Enjoying 3D Images

Setting 3D Images

When 3D data is received from the HDMI1, HDMI2, or WirelessHD (EH-TW6100W only) source, the image is
automatically projected in 3D.
The following 3D formats are supported.
• Frame Packing
• Side by Side
• Top and Bottom
a
Connect an AV device capable of
playing 3D images to the projector.

If the 3D image cannot be viewed

Check the following if the 3D effect is not displayed correctly, even after switching to 3D mode.
• Check that the 3D format for the AV device and the 3D Format for the projector match. s Signal - 3D Setup - 3D
Format p.68
See the manual provided with the AV device for more information on making settings for the AV device.
• The synchronization timing for the 3D Glasses may have been inversed. Inverse the synchronization using Inverse
3D Glasses, and then try again. s Signal - 3D Setup - Inverse 3D Glasses
• If a 3D image is not displayed, try switching by pressing the
c
•
How a 3D image is perceived varies depending on the individual.
•
The image is not displayed in 3D if 3D Display is set to Off. Press the
control. Signal - 3D Setup - 3D Display
s
•
The projector automatically selects the appropriate 3D format, but if the 3D image is not displayed
correctly, use 3D Format to select another format.
•
If the 3D effect is not displayed correctly, try reversing using Inverse 3D Glasses.
Setup - Inverse 3D Glasses
•
When a 3D image is displayed, a warning about viewing 3D images is displayed. You can turn off this
warning by setting 3D Viewing Notice to Off.
•
You can also convert 2D images to 3D images.
•
During 3D projection, the following configuration menu functions cannot be changed.
Aspect (set to Normal), Noise Reduction (set to Off), Sharpness, Split Screen, Overscan (set to Off),
Super-resolution
•
How the 3D image is viewed may change depending on the temperature of the surroundings and how
long the lamp has been used. Refrain from using the projector if the image is not projected normally.
b
p.68
s
p.68
Signal - 3D Setup - 3D Viewing Notice
s
p.48
s
42
Turn on the AV device and the
projector, and then press the
button.
If the 3D image is projected automatically,
you do not need to press any buttons.
p.68
button.
button on the remote
Signal - 3D Setup - 3D Format p.68
Signal - 3D
s
p.68