Base - Epson EB-L1105U User Manual

Part Names and Functions
Name
I
RS-232C port When controlling the projector from a computer, connect
it to the computer with an RS-232C cable. This port is for
control use and should not normally be used.
s "ESC/VP21 Commands"
J
Remote port Connects the optional remote control cable set and inputs
signals from the remote control. When the remote control
cable is plugged into the Remote port, the remote receiver
on the projector is disabled.
s "Optional Accessories"
K
SDI input port Inputs SDI signals from video equipment.
(EB-L1505U/EB-
L1500U/EB-L1405U
only)
L
This is used for batch settings. This port is for control use
Service port
and should not normally be used.
s "Batch Setup"
M
HDMI port Inputs video signals from HDMI compatible video
equipment and computers.
N
Inputs the computer DVI-D signals.
DVI-D port
O
HDBaseT port Connects a LAN cable to the optional HDBaseT
Transmitter.
s "Connecting an HDBaseT Transmitter"
s "Optional Accessories"
P
Connects a LAN cable to connect to a network.
LAN port
When using EB-L1505U/EB-L1500U/EB-L1405U, Art-
Net is supported.
s "About Art-Net (EB-L1505U/EB-L1500U/EB-
L1405U only)"
Function
p.200
p.211
p.147
p.51
p.211
p.206

Base

Name
A
When setup on a surface such as a desk, extend and retract
Front adjustable feet
the feet to adjust the projector's vertical and horizontal tilt.
s "Adjusting the Height of the Projected Image (for
Normal Installment)"
s "Adjusting the Horizontal Tilt (for Normal
Installment)"
B
When setup on a surface such as a desk, turn to extend and
Rear feet
retract to adjust the horizontal tilt.
s "Adjusting the Horizontal Tilt (for Normal
Installment)"
Function
p.39
p.40
p.40
18