Wireless (Evs200Aw) - EverFocus EVS200AW-W User Manual

EVS200A/EVS200AW
4.3.6 Wireless
Wireless Setting
Enable Wireless (Default: disable)
SSID: Name of the wireless network the camera is configured for. The field accepts
up to 32 alphanumeric characters. (Default: default)
Network Type: Infrastructure or Ad-Hoc (Default: Infrastructure)
"Infrastructure" Make the Network Camera connect to the WLAN via an Access
Point.
"Ad-Hoc" Make the Network Camera connect directly to a host equipped with a
wireless adapter in a peer-to-peer environment.
Channel: Shows the wireless channel currently in use. (Default: 1)
Security: Disable Security, WEP or WPA-PSK/WPA2-PSK (Default: Disable
Security)
When selecting WEP:
(WEP (Wired Equivalent Protection) key should follow either one of the following
rules:
- As 5 characters for 64-bit WEP and 13 characters for 128-bit WEP.
- As 10 hexadecimal (0-9, A-F) characters for 64-bit WEP and 26 hexadecimal (0-9,
A-F) characters for 128-bit WEP
. )
Authentication: Open or Shared (Default: Open)
"Open" – communicates the key across the network.
21