Table of Contents
Advertisement
Pro:Centric
Image shown may differ from your TV.
y
Installation Menu (V 3.0)
LG Hotel Mode Setup
TV Manager
Password Change
Set ID Setup
Configuration Setup
Multi Timer
Lock Mode
External Speaker
HCEC Setup
Pro:Centric
S/W : 02.00.00.01 Micom : 0.00.84
1
Use the
button to select the Pro:Centric.
(1) Mode
• Sets whether or not enable Pro:Centric and the service method.
• You can set to Off, Flash or GEM using the < > button. The default value is Off; when it is set to Off,
all the sub items are disabled.(Except for Room Number Setting)
(2) Room Number Setting
• Press the OK button in Room Number Setting item to go to the "Change a room number" menu.
• You can set or change Label and Room Number using the Room Number Setting.
(3) Receive data
• Set to Enable or Disable.
• If the setting is "Enable", receive data via RF.
• If the setting is "No", data carousel is not supported. It can be downloaded via only USB.
(4) RF Type
• Sets the RF modulation type to DVB-T or DVB-C. The default value is DVB-T.
(5) RF Freq.(kHz)
• Sets the RF frequency at which the Pro:Centric data is received.
• Frequency tolerance : start frequency ~ end frequency for each country.
• If the RF Type is DVB-C, it can be changed in the range of 48500~870000.
(6) Symbol rate(KS/s)
• Sets the Symbol Rate at which the Pro:Centric data is received.
(7) Modulation
• Symbol rate and Modulation are 'Enable' when RF type is "CABLE DTV".
Pro:Centric
Mode
Room Number Setting
Receive Data
RF Type
RF Freq . (kHz)
Symbol rate(KS/s)
Modulation
ꕣ
OK
GEM
◄
►
Press OK
Enable
DVB-C
698000
4000
16QAM
Previous
OK
35
Advertisement
Table of Contents
