Table of Contents
Advertisement
(4-2) Local Key Operation
Decide to operate 'Local/Front Key' working behavior by setting 'Local Key Operation' as Normal, Use PWR
Only, Block All.
When 'Local Key Operation' is set to Block All, all local keys don't work. If value is Use PWR Only, it
y
blocks all local keys except power key.
When 'Local Key Operation' is set to Normal, all local key are available.
y
Exception)
In case of power off condition with all key are blocked, 'Power On Status' value turns to 'PWR',
and disabled status to fix value for power on operation. (fool-proof routine)
•
Power On Status
•
Key Management
•
IR Operation
•
Local Key Operation
(5) Limited Mode
Configure TV function's limitation. When selected to 'Yes', following sub-menus will be worked by below.
(5-1) Setup Menu
Decide to enter 'Setup' Menu' as 'Yes'(Enter possible) or 'No'(Enter impossible)
(5-2) Input Source Change
Decide to change input source or not by setting 'Input Source Change' as Yes(Change possible) or
No (Change impossible).
When 'Input Source Change' is set to 'No' (Change impossible)
y
» 'INPUT key' doesn't work, and Input Source Changing via 'TV D/A' key, 'TV/RADIO' key aren't
possible (ex. Press TV/RADIO Key in HDMI source to view TV channel)
» User's input (pressing Programme key, numeral key, List key, Q.View key in all Input source
except TV source) doesn't work.
» Entering 'Setup Menu' item in the 'Main Menu OSD' except TV mode doesn't accepted.
Because entering 'Setup Menu' item makes present mode as TV mode even though present
mode is not TV. Change to TV mode isn't allowed.
» TV set always turns on fixed input source and volume information regardless of already
set information.
» Entering 'Setup Menu' except TV mode is impossible regardless of 'Programme Change'
or 'Setup Menu' items' value.
» TV can be only turned on with the input source which is irrelevant from the programme
related information set (volume, input) in 'On Time' Menu.
» Auto AV and HDMI-CEC still work regardless of Input Source Change's value.
» When 'Input Source Change' is set to Yes(Change possible), changing input source is available.
STD
◄
►
Yes
◄
►
Block All
◄
►
Block All
◄
►
•
Power On Status
PWR
◄
►
•
Key Management
Yes
◄
►
•
IR Operation
Block All
►
◄
•
Local Key Operation
Block All
◄
►
11
Advertisement
Table of Contents
